Wardrobe interiors and storage, made to measure in Lorca
A good wardrobe is won or lost on the inside, in the way its interior is laid out. The doors are what you see, but what shapes your day-to-day is how many garments fit on the hanging rail, where the jumpers get folded and whether the drawers open without hitting anything. If you are looking for made-to-measure wardrobe interiors and storage in Lorca, here is the order to plan it in: first what you keep, then the usable measurements and, finally, the accessories that are genuinely worth having.
Shape your next wardrobe.
Try out the measurements, plan the interior layout and choose your finishes. See your idea take shape and share it with us so we can prepare your quote.
Send us your configuration with your measurements and we'll give you a guide price within 24 hours, free of charge. The measuring visit at your home comes afterwards.
Start with what you store, not with the wardrobe
Before choosing a single shelf, make a simple inventory on the bed. Separate what hangs, what gets folded, what needs a drawer and what is only used twice a year. Count shoes, bags, belts and bedding too, which are almost always forgotten and end up taking over half a shelf.
With that pile in front of you, planning the storage stops being guesswork. If you have lots of shirts and dresses, you will need more hanging rail; if T-shirts and jeans dominate, shelves and drawers will win out. Also note who uses each area, because not everyone can reach a rail at 1.80 m, and a shelf at floor level is tiring for anyone who has to bend down every morning.
Measure the usable interior with the doors open
The width you see from the outside is not the width you can actually use. Inside, there are sides, uprights, hinges and runners that eat up a few centimetres, and a plinth or cornice that cuts into the height. That is why the inside of a wardrobe is measured from wall to wall at the top, the middle and the bottom, since differences between the three figures are common.
Also note the depth at several points, the clear height up to the ceiling and the position of sockets, switches and pipes. If the wardrobe is already installed in your home in Lorca, measure with the doors fully open and note which parts stick out. With those figures, the interior layout of your wardrobe is drawn up on a real plan rather than on a rounded-off measurement, which is where mismatches begin.

Hanging rails, shelves, drawers and top cupboards: how to divide the space
In the best-working wardrobe interiors, the height is split into three zones. The middle one, between waist and shoulders, holds what you reach for most: shirt rails, shelves with everyday clothes and the main drawers. The lower zone takes shoes, baskets and deep drawers for heavy items. The upper zone is kept for the top cupboard, with suitcases and blankets.
Rails are sized by type of garment. Dresses and long coats need almost 1.50 m clear from floor to rail, while two stacked rails for shirts and folded trousers make better use of the space. In the interior layout, a third of the unit as shelves, another as rails and the rest as drawers is a reasonable starting point, which is then adjusted to your inventory.
Have you already measured the space?
Send us a photo and the approximate measurements on WhatsApp and we'll give you some initial guidance.
Shoes, long garments and small accessories
- 01
Footwear needs its own solution within wardrobe storage. Angled or pull-out shelves avoid stacking shoe boxes, and the depth of a large shoe sets the minimum depth of the unit. If you like tall boots, it is worth reserving a section of about 40 cm with no shelf.
- 02
Long clothes need uninterrupted clear height, which is why they are not hung under a low top cupboard. For accessories, wardrobe interiors include trays with dividers in the upper drawers, where belts, ties, watches and costume jewellery fit. A pull-out trouser rack, a fold-down shoe rack or a laundry basket are specific accessories that slot into the wardrobe interior without changing its exterior.
Adapting a wardrobe you already have
You don't always have to throw the wardrobe out to improve it: often it is enough to redo the inside. If the structure is sound, the doors fit well and the depth is sufficient, you can renovate just the wardrobe interior: remove the old layout and fit another designed for you. The condition is that the carcass holds up, the sides are plumb and there is no damp or swollen board.
If you have a built-in wardrobe or a model that is several years old in Lorca, it is worth looking at what limits the renovation of the interior: doors that intrude into the inside, runners that take up depth or a frame that won't take wide drawers. With a few photos of the open wardrobe and its measurements, we can assess what can be kept and what needs replacing, or whether a complete new wardrobe is better value.
Latest work by SI, ARMARIO
@si.armario
Made-to-measure wardrobes and walk-in wardrobes
Latest posts
Accessories that get used and accessories you can do without
An accessory earns its place when it solves a daily annoyance. A pull-out trouser rack saves rummaging; a drawer with dividers keeps socks in view; a pull-down rail brings clothes from the top cupboard down to your hand. With the list of what you keep, it is quickly clear which wardrobe interior accessories add value and which stay in the catalogue.
On the other hand, some pieces only add cost if your needs are modest: tie racks for someone who doesn't wear ties, five rotating baskets where one will do, or a pull-out mirror when there is already a mirror hanging in the room. Ask only for what suits your clothes, and leave free space for what you will buy later.

Ask us to come and measure up in Lorca
- 01You leave us your name and your area.
- 02We message you on WhatsApp to agree a day.
- 03The measuring visit costs €50 and is free if you place an order.
Interior materials and fittings
In wardrobe interiors, the board is usually melamine, and its thickness determines how much the shelves sag: a long shelf carrying weight will bend if it is thin or has no reinforcement. Drawers are the most demanding element, because they are opened hundreds of times and depend on quality runners, with soft-close if you want silence.
Rails, brackets and screws count too. In Lorca, with its dry, hot summers, it is best to choose well-sealed board edges so they don't lift over time. Light interior finishes help you see your clothes, while a dark one hides wear. Every choice is noted in the quote so you know exactly what will be fitted.
What determines the quote for a new interior in Lorca
- 01
The price depends on four things: the number of units, the number of drawers with their runners, the type of accessories and the work of dismantling and removing the old interior, if there is one. In wardrobe storage, one with many shelves and few moving parts comes at a different price from one with eight drawers and trouser racks.
- 02
To find out what each element costs, the general approach is set out under prices. You can send your inventory and measurements through the configurator, which prepares a design and passes it to the team. You then receive an indicative figure and, if you go ahead, the measuring visit costs €50 only if you don't place the order. Manufacturing usually takes around 2 to 3 weeks.
Enquiry
Tell us about your project in Lorca
- 1We read your message and look at your photos.
- 2We reply on WhatsApp with a first figure.
- 3We measure up and prepare the final quote. The measuring visit costs €50 if you don't go ahead with the order and is free if you do.
We don't cut a single board until you've approved the design and the price.
Questions
Frequently asked questions about wardrobes in Lorca
After installation: warranty and care for your wardrobe.
Can you renovate just the interior and keep the current doors?
Yes, as long as the doors fit well and the opening allows for the new layout. We measure the depth and the space taken up by the fittings, and design the wardrobe interior so the drawers don't hit the existing doors.
What should I check in an old wardrobe before touching it?
Damp at the back, bowed sides, swollen board and loose fittings. If the structure holds up, it is reused and redone inside; if not, a new wardrobe in the same space makes more sense.
How do you avoid drawers rubbing against the doors?
The opening of each drawer is calculated with the doors already installed. With hinged doors, drawers are kept away from the hinges or set-back fronts are used, and with sliding doors each drawer is placed in the accessible section.
Can I order individual pieces such as drawers or shelves?
A partial order can be considered if the carcass allows it. In Lorca, the usual approach is to start from your measurements and the list of what you want to add, and the team will tell you whether it fits.
How much depth do I need for a good wardrobe interior?
To hang clothes on hangers you need about 55 cm of usable depth, and with less you can hang them sideways. Shelves and drawers work well from 35 or 40 cm, which makes shallow wardrobe storage possible.
Shall we talk about your project?
Send us a photo of the space and some approximate measurements on WhatsApp: we'll give you some initial guidance and arrange the measuring visit.

