Lorca: our process, from first contact to installation

Ordering a made-to-measure wardrobe in Lorca is less a one-off purchase and more a journey in eight stages. At each one, there is something you provide, a decision you make and a document that passes on to the next step. This page describes how ordering a made-to-measure wardrobe with us works, so you know in advance what happens, who does what and when it's your turn to choose.

  1. 01Ballpark price
  2. 02Measuring
  3. 03Design
  4. 04Final quote
  5. 05Approval
  6. 06Manufacture
  7. 07Installation
  8. 08Final check

Shape your next wardrobe.

Try out the measurements, plan the interior layout and choose your finishes. See your idea take shape and share it with us so we can prepare your quote.

Send us your configuration with your measurements and we'll give you a guide price within 24 hours, free of charge. The measuring visit at your home comes afterwards.

The eight stages of your order

  1. 01

    Guide price

    Tell us what you'd like and send photos, approximate measurements and your address. We'll reply with a guide price, subject to a measuring visit.

    By WhatsApp
  2. 02

    Measuring visit

    We arrange a visit to your home to look at the space and the access routes. In Lorca it costs €50 if you decide not to go ahead with us, and it's free if you do.

    €50 if you don't order
  3. 03

    Design and plans, if needed

    In Lorca, production begins after the measuring visit, and the terms we agree are set out in the proposal.

    Depends on the project
  4. 04

    Final quote

    Once the measurements are confirmed, we draw up a detailed quote for you in Lorca that fixes the interior layout, materials, hardware, installation and price.

    In writing
  5. 05

    Approval and deposit

    Once you've approved the proposal and paid the agreed deposit, we start your project in Lorca.

    Agreed deposit
  6. 06

    Manufacturing

    We make the furniture to the design you've approved and arrange everything for delivery and installation in Lorca.

    After the deposit is paid, the average lead time is 2–3 weeks
  7. 07

    Installation

    At your home in Lorca, you receive the furniture installed by us, with doors, fronts and finishing touches adjusted to perfection.

    At your home
  8. 08

    Walk-through with you

    In Lorca we check every opening, the finishes and how the whole unit works, and anything that needs adjusting afterwards is noted down in writing.

    In writing

Stage 01

What we need for an initial assessment

  • —A fitted wardrobe, sliding doors, a walk-in wardrobe… or you're not sure yet: in Lorca we start from whatever you tell us
  • —Neighbourhood or town
  • —Approximate width, height and depth in cm
  • —Photos of the available space from the front and from both sides
  • —Be clear about the space you need: for hanging clothes, folded clothes, shoes and suitcases
  • —Any preferences you already have for doors and finishes

No drawing or exact measurements needed.

Stage 02

What we check when we come to measure

  • —We measure the space horizontally and vertically from several points, so we know if the walls or ceilings in Lorca are uneven
  • —Floor level and skirting board
  • —Beams, radiators, windows, switches and sockets on the wall
  • —Clear space in front of the wardrobe so the doors can open
  • —We make a note of access to the building, the stairs and the lift so we can plan how the pieces are carried up

Stages 05–08

Approval and installation day

How approval works

If you're in Lorca, once we have the final measurements we settle the interior, doors, materials and hardware, and the detailed quote puts everything in writing. Once you accept it and pay the deposit, manufacturing begins.

What you prepare

In Lorca we ask for an empty space with clear access and floors and walls already finished. Any preparatory work, from moving sockets to knocking down partition walls, is carried out before we start.

What we do

In Lorca we take care of installing the wardrobe, adjusting it and going over it with you, and any outstanding details are given to you in writing. If you'd like us to take the old one away, that service will be included in the quote.

01

1. Guidance based on your details

It all starts with what you send us: approximate measurements, photos of the space and an idea of what you want to store. You can do this with the configurator, which prepares a design and sends it in for review, or by writing to us on WhatsApp or through the form.

With that information, our team replies within a day with a guide price for your project in Lorca, so you can see whether it fits your budget. It is not yet a firm price: it is the starting point for moving forward.

Phone on a tripod measuring an empty bedroom with a tape measure, to plan a made-to-measure wardrobe in Lorca

Instagram

Latest work by SI, ARMARIO

@si.armario

Made-to-measure wardrobes and walk-in wardrobes

Latest posts

02

2. Measuring up in your home in Lorca

If the guidance suits you, the measuring visit is booked in. We check that the walls are plumb, the level of the floor, the real ceiling height and the position of sockets, radiators and windows. This is the stage where the design stops being approximate.

The visit costs €50 if you end up not ordering the wardrobe, and it is free if you go ahead. It helps if someone is at home and the space is clear so we can reach the corners properly.

Have you already measured the space?

Send us a photo of your room and the approximate dimensions on WhatsApp, and our team will give you some initial guidance.

03

3. Design and interior layout

  • 01

    Once the measurements are taken, the design is finalised: the arrangement of units, type of door, number of hanging rails, shelves and drawers. When the order calls for it, you are shown a plan or sketch to review.

  • 02

    This is the time to change your mind at no manufacturing cost. Tell us everything now: if you would like more long-hanging space, an extra drawer or a lower shelf, it is adjusted on paper rather than on a wardrobe that has already been cut.

04

4. Final written quote

The final quote is drawn up from the agreed design. It should detail measurements, materials, finishes, hardware, number of pieces, transport, installation and what is not included. It is the document that replaces the initial guide price, and the one worth comparing with other proposals.

Set aside some quiet time for it and note down any questions before you reply. If anything has changed from what was discussed, it is explained in writing before you approve.

05

5. Approval and deposit

Once the quote suits you, you confirm it and agree the deposit that starts manufacturing. From this point on, the materials and layout are fixed.

A later change may be possible if manufacturing has not yet begun, but it could affect the price or the lead time. That is why it is best to settle every decision before this step.

Made-to-measure wardrobe with four off-white lacquered doors and oak shelving, with plans on the table in Lorca
Measuring visit

Ask us to come and measure up in Lorca

  • 01Your name and your area: with those two details we take the first step.
  • 02A couple of WhatsApp messages are enough to agree when we'll meet.
  • 03The €50 measuring fee only applies if you end up not placing the order with us; if you do, you aren't charged.
06

6. Manufacturing and installation date

Once the design is approved, the pieces are made in an average of two to three weeks. That timescale covers manufacturing only; installation is arranged separately, on a day agreed with you according to your availability.

In the meantime, wherever you live in Lorca, whether in town or in one of the outlying districts, we will let you know if anything comes up that affects the date, so you can plan your diary at home in good time.

07

7. Getting your home ready for the wardrobe

  • 01

    Before installation, clear the room and remove anything in the space. If we are replacing an old wardrobe, it is worth knowing in advance how it will be removed and who will do it. Check access too: lift, door width, and any permission needed from your community of owners to bring materials in in Lorca.

  • 02

    A few minutes of preparation save hours on installation day and reduce the risk of having to postpone it.

08

8. Final check together

When installation is finished, we go over the wardrobe with you: door alignment, drawer opening, shelf stability and finishing touches. If anything needs correcting, it is noted there and then.

Any later issue is reported through the same contact channels, with photos and project details. Details on care and adjustments are on the care and adjustments page.

Questions

Frequently asked questions about wardrobes in Lorca

Every job we show has a team behind it, and here you can get to know SI, ARMARIO.

Can I rely on the first figure you give me?

No. It is a guide price calculated from your approximate details. The fixed price comes after the measuring visit, once the design and materials have been agreed.

When do I approve the finishes and the interior layout?

After the measuring visit, with the design in front of you. They are confirmed in writing before the deposit, and from that moment they form the basis for manufacturing.

I've already approved the design and regret one detail. Is there anything that can be done?

It depends on whether manufacturing has started. If it hasn't, it is usually possible to make adjustments, although the price or date may change. If it is already under way, we look at what can still be modified.

What do we check together once installation is finished?

Doors, drawers, shelves, alignment and finishing touches. We check that everything works as agreed and note down any outstanding detail.

Shall we start with step one?

In Lorca, three measurements and a photo sent via WhatsApp are enough to get started. A photo taken on your phone does the job.

Your satisfaction is our priority We listen to your ideas and go through the measurements, finishes and every detail of the project with you.
WhatsAppQuote