Made-to-measure fitted wardrobes in Lorca
A fitted wardrobe is built into an alcove: it meets the floor, the ceiling and the walls, so there is no room for approximate measurements. If you are looking for made-to-measure fitted wardrobes in Lorca, the key is to read that space properly before choosing doors or the interior layout. Here we go through when this solution is worth it, what gets measured, how crooked walls are dealt with, and which decisions change the result and the quote.
Shape your next wardrobe.
Try out the measurements, plan the interior layout and choose your finishes. See your idea take shape and share it with us so we can prepare your quote.
Send us your configuration with your measurements and we'll give you a guide price within 24 hours, free of charge. The measuring visit at your home comes afterwards.
01 — Before designing
Lorca: a made-to-measure wardrobe that starts from the space you already have at home
An exact recess is not the norm in Lorca. A fitted wardrobe is designed around the real measurements of your home, and any differences are dealt with using filler and trim pieces.
- Alcove
- End of a corridor
- Side of a bedroom
- Under a beam
A piece that belongs to the space
In Lorca we make the most of a recess in the wall, or dress an entire wall from top to bottom, with trims that follow the floor, walls and ceiling exactly as they are.
The wall matters too
In Lorca we assess damp, walls that are out of plumb, skirting boards and services. If any building or electrical work is needed, we make that clear in the quote.
02 — Measurements
The measurements worth knowing
A rough estimate of the measurements is enough for your first quote. When it's time to measure properly, we come to your home in Lorca and do it ourselves.
- Three widths of the recess, one for each height checked: A1–A3
- H1–H2Check how tall it is at each end and note down the smaller figure
- FAvailable depth
- !Mark the position of switches, radiators, windows and sockets on the plan
03 — Finishing
Uneven walls, ceiling and skirting board
The wardrobe sits level
In Lorca, when a wall isn't perfectly straight, made-to-measure cover strips and trims hide the mismatch.
Right up to the top, no gap
In Lorca you can choose a full-height unit or add a separate top cupboard. A filler piece takes up any difference in level.
Removed or worked around
With the plinth, it can either be removed or dealt with using another solution. In Lorca we decide this before anything is made.
04 — Interior
How to organise the interior
How you store your things is where we start in Lorca; standard units don't set the direction.
- 01Hanging space for clothes of every length, with rails at two heights if the recess allows
- 02Fixed or adjustable shelves
- 03Internal drawer units designed for underwear and accessories
- 04Shoe rack, trouser rack or pull-out trays
- 05A generous top cupboard for suitcases, blankets and the clothes you rotate with every change of season
05 — Doors
Which doors to choose
Hinged
+You can see the whole interior at once.
−Keeping the area in front clear is essential for the doors to open properly.
Sliding
+They don't take up room space.
−Behind the doors, only one section is on view each time you use them.
Your wardrobe in Lorca can be finished with melamine, lacquered, mirror or glass doors, or a mix of these, and that choice affects both the look and the quote. Inside, the choice can be simpler.
07 — Price
What affects the price?
Your first figure is an estimate. Then, before we make anything, the final price is sent to you in writing.
Measurements and finishing
Out-of-square walls, height up to the ceiling and top cupboard.
Doors
Doors, material and opening system.
Interior
Layout, drawers and fittings.
08 — Process
How your order progresses
- 01Initial informationSend us photos, approximate measurements and where you live, and we'll come back to you with an indicative price.
- 02 · measuringWe measure the whole space carefullyWe take measurements at several points on the walls, ceiling and skirting.
- 03The design arrives, when neededFinal measurements and agreed terms, set out in the proposal.
- 04Fixed priceWe fix the total cost of the interior, doors, materials, fittings and installation, as well as when it will be ready.
- 05Your approval and the agreed depositYou review the project, approve it and make the initial payment we agreed between us.
- 06 · 2–3 wksManufactureThe carcass and the pieces that fit the whole unit are made.
- 07Assembly and adjustmentWe install with the carcass perfectly level, finish off any gaps against the walls and ceiling, and adjust the doors until they run smoothly.
- 08Final check with youWe go through every door and drawer without rushing, together with you. Anything outstanding is noted down in writing.
What to prepare before installation
- Empty, accessible recess
- Floor and walls finished
- Electrics sorted inside the recess
- Access to the building entrance and lift
Limits of this solution
If the wall in Lorca has damp, deal with it first: a wardrobe won't make it go away.
Plasterboard, building work or electrical work are only included if the quote says so.
Walls with a pronounced lean mean wider filler pieces and, in Lorca, more visible trim too.
When a fitted wardrobe is worth it
A fitted wardrobe wins when you have a space available: a recess next to the door, the end of a bedroom, the entrance hallway, or the gap the builders left under a load-bearing wall. In all of these cases the furniture takes up a spot that would be no use for anything else, and the room keeps all of its free floor area.
Compared with a freestanding piece, a bespoke fitted wardrobe goes right up to the ceiling, uses the wall itself to close off the sides, and leaves no dust behind or beside it. The trade-off is that it is fixed to that corner. If you plan to move the bedroom around in a few years or you rent your home, it is worth thinking twice before deciding.

Latest work by SI, ARMARIO
@si.armario
Made-to-measure wardrobes and walk-in wardrobes
Latest posts
Measuring the real space: width, height and depth in Lorca
The tape measure goes across each dimension three times. Width is taken at the top, in the middle and at the bottom; height at both ends and halfway across the space; depth at the front and at the back. There can be a centimetre or more between one reading and another, and the fitted wardrobe is made to the smallest one.
We also note any bedroom doors that open nearby, the window frame, sockets and any services running through the space. In Lorca, in older homes, it is common for the floor not to be level, so we record the difference in height between the two sides. With that basic plan, the manufacturer sizes pieces that fit without being forced.
Have you already measured the space?
Photograph the area, jot down the length and width by eye and send them to us on WhatsApp; in Lorca we'll reply with a first idea of how to approach it.
Walls, skirting boards and finishes up to the ceiling
- 01
No wall is perfect. A fitted wardrobe ends up covering that unevenness with adjustment profiles, also called cover strips or fillers, which are trimmed on site and hide the gap between the wardrobe and the wall. The more crooked the space, the wider the finishing strip will be.
- 02
The skirting board is usually removed in the wardrobe area, or kept by using a cut-out plinth. At the ceiling, you decide whether the wardrobe goes all the way up with a cornice, or leaves a strip for a ventilated top cupboard. With a wall that is not plumb, the cleanest solution is to split the difference between both sides rather than put it all on one.
Doors and access to the interior
The type of door changes how you live with a built-in wardrobe. Hinged doors give full access to the interior and are the simplest option, but they need room to swing. Sliding doors save that swing radius and suit narrow bedrooms, although they only leave part of the opening accessible at a time.
Bifold doors sit somewhere in between. Before deciding, we draw the swing of each option on the plan: where it hits the bed, the bedside table or the bedroom door. If the space is very wide, it is better to divide it into several narrower panels, which weigh less and hold their adjustment better over the years.
Interior layout for clothes, drawers and top cupboards
A deep, tall space allows a very complete interior layout. The usual approach is to hang clothes in the central section, put drawers at the bottom, place shelves for jumpers at mid-height, and keep the top cupboard for suitcases and bedding. It is divided up according to your clothes, not to a template.
The wider the fitted wardrobe, the more modules it can take, and it is worth alternating hanging-rail sections with drawer sections so that all the weight does not build up on one side. If the depth is limited, clothes can be hung sideways on a pull-out rail. The details of the interior layout are explained in storage for wardrobes.

Book a measuring visit at your home in Lorca
- 01First, your name; then, the area where you live.
- 02We message you on WhatsApp to ask when suits you and set the day without delay.
- 03Without an order, the measuring visit costs €50; if you go ahead with an order, it's free.
What to check before installation
In the week before, it is best to clear the space completely and check that the entrance allows long pieces to get past the stairs or the lift. The wardrobe space needs to be clean, with the walls finished, because a patch of fresh plaster or a half-done skirting board means measurements have to be redone.
We also confirm whether skirting boards need removing, a radiator needs moving or a light point needs shifting. A fitted wardrobe that covers a socket is solved with a planned access point, not an improvised hole. With clear access, installation is a matter of one day in most cases, although each project is planned with its own sequence.
What makes the price of a fitted wardrobe in Lorca go up or down
- 01
The three main factors are the size of the space, the type of doors and the complexity of the interior. A two-metre fitted wardrobe with two hinged doors and shelves sits in a very different range from a four-metre one with mirrored sliding doors, drawers on soft-close runners and a top cupboard.
- 02
Finishing work on uneven walls, removal of an old wardrobe and the finishes you choose also have an effect. To understand how each item is built up, see prices. If you want a starting point, the configurator prepares a design with your measurements and the team replies with a guide price. The measuring visit costs €50 if you do not go ahead with the order, and manufacturing usually takes 2 to 3 weeks on average.
Limits of the space and alternatives
Not every space will work. If the depth is under around 35 cm, a fitted wardrobe is of little use for hanging clothes and you will need to think about shelves or a deeper unit that takes space from the room. If the space has a pillar halfway along or a low beam, the wardrobe has to be designed around it.
When the space is too small for a closed wardrobe, it is worth considering a made-to-measure walk-in wardrobe in another room, a corner unit, or a wardrobe with sliding doors set against a free wall. It is best to describe your space with measurements and photos before deciding, so that the alternative responds to what you already have.
09 — Enquiry
Tell us about your fitted wardrobe project in Lorca and we'll see how to make it happen
- 1We read what you write and study the photos of the space.
- 2Contact us on WhatsApp from Lorca and you'll receive a first figure from us.
- 3We visit your home in Lorca to measure up and give you the final quote. The measuring visit is charged at €50 only if you don't go ahead with the order; if you do, it's free.
Until you sign off the design and the price, the boards for your wardrobe in Lorca remain untouched.
10 — Questions
Questions about fitted wardrobes
Once the wardrobe is fitted, we advise you on its warranty and maintenance.
What happens if the walls of the space are crooked?
Yes, it can be done. The fitted wardrobe is made to the tightest measurement and the finishing pieces absorb the difference. Up to a point, a crooked wall only calls for a slightly wider closing profile on one side.
Does fitting a built-in wardrobe in my home mean opening up walls or chasing them out?
Almost never. In a home in Lorca with brick or plaster walls, it is installed on the existing floor and walls, and any changes are limited to removing a skirting board or adjusting an electrical point. Only if a partition wall has to be moved or a new opening made are we talking about proper building work.
How high does the wardrobe go and what fits in the top cupboard?
It can, and it is usually the best way to make use of the volume. The top cupboard is divided into manageable modules and sits above the doors, with a cornice or with split doors, depending on the height of your ceiling.
Can I make use of any of the existing built-in wardrobe in the space?
It depends on its condition. If the structure is sound, the carcass can be kept and the doors and interior replaced; if there is damp or the depth is insufficient, it is more practical to replace it entirely with a made-to-measure fitted wardrobe.
What are the steps and timescales from the moment I send my design?
After you send the design, you receive a guide price and the measuring visit is arranged. Then it is manufactured and the installation is coordinated in Lorca or in the town where your home is.
Got a space you're not making the most of?
Are you in Lorca? Take a photo of the recess from the front, check its width at the top and at the bottom, and send everything to us on WhatsApp. If you don't go ahead with the order, the measuring visit costs €50; if you do, it's free.

